Whitehouse Road, Kidderminister, Worcs, DY10 1HT
Quality - Performance - Reliability


We at Quantum Mouldings Limited always strive to deliver quality products that meet or exceed customer expectations and satisfaction.

Management demonstrates its commitment to this policy by doing the following: meeting all statutory and regulatory requirements of ISO 9001:2008, and continually improving quality, service, costs and technology.

Management Reviews of operational and business performance data, customer satisfaction surveys, audit results and the results of corrective and preventive actions are used to assess the effectiveness of the system and identify areas of continual improvement activities.

The Quality Policy, Quality Assurance Manual and the accompanying Quality Control Procedures are therefore regularly reviewed and improved.

Standards set by Quantum Mouldings Limited. are achieved by adhering to a stringent Quality Assurance System that conforms to the requirements of ISO 9001:2000 (and any subsequent amendments) and those imposed by our customers including P.P.A.P, APQP, and 8D Principles.

Production Part Approval Process:

The Production Part Approval Process (PPAP) outlines the methods used for approval of production and service commodities, including bulk materials, up to and including part submission warrant in the Advanced Quality Planning process. The purpose of the PPAP process is to ensure that suppliers of components comply with the design specification and can run consistently without affecting the customer line and improving the quality systems. PPAP ensures that you will achieve the first time quality and will lower down the cost of quality.

Advanced Production Quality Planning

Phase 1
Plan & Define Programme – determining customer needs, requirements & expectations using tools such as QFD review the entire quality planning process to enable the implementation of a quality programme how to define & set the inputs & the outputs.

Phase 2
Product Design & Development – review the inputs & execute the outputs, which include FMEA, DFMA, design verification, design reviews, material & engineering specifications.

Phase 3
Process Design & Development – addressing features for developing manufacturing systems & related control plans, these tasks are dependent on the successful completion of phases 1 & 2 execute the outputs.

Phase 4
Product & Process Validation – validation of the selected manufacturing process & its control mechanisms through production run evaluation outlining mandatory production conditions & requirements identifying the required outputs.

Phase 5
Launch, Feedback, Assessment & Corrective Action – focuses on reduced variation & continuous improvement identifying outputs & links to customer expectations & future product programmes.

Control Plan Methodology –
discusses use of control plan & relevant data required to construct & determine control plan parameters stresses the importance of the control plan in the continuous improvement cycle.

Eight Disciplines The 8D Process is a problem solving method for product and process improvement. It is structured into 8 steps (the D’s) and emphasizes team. This is often required in automotive industries. The 8 basic steps are:

D#1 – Establish the Team
D#2 – Describe the problem.
D#3 – Develop an Interim Containment Action
D#4 – Define / Verify Root Cause
D#5 – Choose / Verify Permanent Corrective Action
D#6 – Implement / Validate Permanent Corrective Action
D#7 – Prevent Recurrence
D#8 – Recognize the Team

quality you can trust

quality you can trust

Quick Enquiry

Quick Enquiry

Quantum Mouldings Limited: Whitehouse Road, Kidderminister, Worcs, DY10 1HT
Tel: +44(0) 1562 747 975Fax: +44(0) 1562 741 320E-mail: sales@quantummouldings.co.uk

Terms & Conditions | Privacy Policy
© Quantum Mouldings Limited.
All Rights Reserved. Designed by JDR Group